Aircraft N273MD Photo

N273MD, 2008 Dickenson Howard DGA-21 (Replicate), C/N: 001
Links to this page and other related pages
More photos of N273MD
Have a photo of this aircraft? Share with others.
Photo ID: AC321029
N273MD, 2008 Dickenson Howard DGA-21 (Replicate), c/n 001, 2008 Dickenson Howard DGA-21 'Mr. Dickenson', P&W R-1340-57 Wasp 600 Hp, landing roll Rwy 22
❮ ❯
2008 Dickenson Howard DGA-21 'Mr. Dickenson', P&W R-1340-57 Wasp 600 Hp, landing roll Rwy 22
Location:
Doug Robertson's photo gallery  >  Civil/Military Aircraft-Amateur-built LSA-Experimental class  >  Dickenson Howard DGA-21, 6+15=21 -Bruce Dickenson
Photo Info
Photographer
Doug Robertson Contact
More photos by Doug Robertson
Shot Date 2009-05-15
Airport SZP
Santa Paula Airport
Upload Date 2009-05-17
Views 624
EXIF Data
Camera Make Canon
Camera Model Canon PowerShot A720 IS
Shutter Speed 1/640 sec
Aperture f/4.5
ISO 4944
Focal Length 30.8 mm
Exposure Bias 0 EV
Metering Mode Unknown (4576)
White Balance Manual
Dimensions 1600 × 1200
Date Taken 2009-05-15 16:52:54
More photos of N273MD
Total 249 photos. View all photos
N273MD @ SZP - Dickenson Dickenson-Howard DGA-21, press used to stabilize aluminum sheet with fixture during bump cowl forming-with female cowl mold - by Doug Robertson
Doug Robertson
@ SZP
N273MD @ SZP - Dickenson Howard DGA-21 'FLYING D', cabin & unfinished panel, dual controls - by Doug Robertson
Doug Robertson
@ SZP
N273MD @ SZP - Dickenson Howard DGA-21, P&W R-1340-57 Wasp 600 Hp engine, cowl forming mold - by Doug Robertson
Doug Robertson
@ SZP
N273MD @ SZP - Dickenson Dickenson-Howard DGA-21, builder with two formed cowl bumps. Annealed aluminum sheet is held by jig in the press and pneumatic soft-nosed hammer taps the formed aluminum cowl bump shape with many, many taps into the female mold. - by Doug Robertson
Doug Robertson
@ SZP
N273MD @ SZP - Getting painted - by Bruce
Bruce
@ SZP
Full size photo
Loading...